Ricrkp

by Ric
(Monessen, PA)

I recently bought a MITTLER BROS 36 "bead roller for doing embossed panels and car interiors. The machine is FABULOUS but the stand that they offered fell short of what what needed. The scooter rocked back and forth due to the one point mounting.

SOOOO I bought a harbor freight engine stand and added the following pieces to make it a solid mount and portable. I came off the engine mounting flange with a 2 x 2 square tubing forward and then down to the front of the stand. then came off the tubing with 4 pieces of 2 x 2 tubing to support the table. the uprights are 3/8 1 1/2 flat bar and the table support are the same flat bar. The tubing affords a place to mount the spare it. Now it is rock steady and portable.